60
61
Troubleshooting
First, try the actions described on pages 61 - 67. If the problem persists, consult the installer, seller, or TOTO
customer service (see contact information on the back cover).
CAUTION
If a water leak occurs, close the shutoff valve.
3OHDVHFKHFN¿UVW
Is the Power LED lit?
■
Is the breaker on the distribution board turned on?
➞
Check whether there is a power outage or the breaker has turned "OFF".
■
,VWKHSRZHUVZLWFKÀLSSHGWR2))"
➞
Flip it to "ON". (Page 13 Step
2
-
2
)
■
,VWKH3RZHU212))VHWWLQJ2))"
➞
Switch it to "ON" with the remote control. (Page 13 Step
2
-
2
)
Is the Energy saver
LED lit?
■
While the LED is lit, energy saver
(Page 24)
is in operation,
so the toilet seat temperature may be reduced or the
heater may be turned off.
Is the remote
control working?
■
Does the display screen
on the back of the remote
show "
"?
➞
Replace the batteries. (Pages 12, 56)
■
Is the remote control
transmitter or the remote
control receiver blocked?
➞
Remove obstructions, dirt, water
droplets or any other blockages.
Remote control receiver
Flat-head
screwdriver
or
How to remove the operation guide
Follow the procedure below.
1
5HPRYHWKHFRYHURQWKHOHIWVLGHRIWKHPDLQXQLWDQGÀLSWKHSRZHU
switch to "OFF".
(Page 13)
2
Remove the remote control from the hanger.
(Page 12)
3
Remove the hanger and
operation guide.
Hanger
Operation guide
Phillips screwdriver
Screw
4
Screw the hanger on the wall.
5
Mount the remote control in the hanger.
Flip the power switch to ON.
(Page 13)
•The "Power" LED lights up.
Reinstall the cover.
(Page 29)
■
To install back the operation guide, follow the procedure above.
(Install the operation guide at step
4
.)
What to Do?
Removal of Operation Guide
Remote control
transmitter
The remote control
uses
batteries
to operate.
Reference
