What to Do?
Removal of Operation Guide
38
39
How to remove the operation guide
To remove, follow the procedure below.
1
Remove the cover on the left side of the main unit, and
fl
ip the power
switch to "OFF".
(Page 13)
2
Remove the remote control from the hanger.
(Page 12)
3
Remove the hanger and
operation guide.
Hanger
Operation guide
Phillips screwdriver
Screw
4
Screw the hanger on the wall.
5
Mount the remote control in the hanger.
6
Flip the power switch to ON.
(Page 13)
•
The "Power" LED lights up.
7
Reinstall the cover.
(Page 25)
■
To install back the operation guide, follow the procedure above.
(Install the operation guide at step
4
.)
Troubleshooting
First, try the actions described
on pages 39 - 43.
If the problem persists, consult
the installer, seller, or TOTO
customer service (see contact
information on the back cover).
CAUTION
If a water leak occurs, close the shutoff valve.
Please check
fi
rst
Is the Power LED lit?
■
Is the breaker on the distribution board turned on?
➞
Check whether there is a power outage or the breaker has turned "OFF".
■
Is the power switch
fl
ipped to "OFF"?
➞
Flip it to "ON". (Page 13 Step
2
-
2
)
■
Is the "Power ON/OFF" setting "OFF"?
➞
Switch it to "ON" with the remote control. (Page 13 Step
2
-
2
)
Is the Energy saver
LED lit?
■
While the LED is lit, energy saver
(Page 20)
is in operation,
so the toilet seat temperature may be reduced or the
heater may be turned off.
Is the remote
control working?
■
Is the "
" LED on the
backside of the remote
controller
fl
ashing?
➞
Replace the batteries. (Pages 12, 34)
The remote control
uses
batteries
to operate.
■
Is the remote control transmitter or the remote control
receiver blocked?
➞
Remove obstructions, dirt, water droplets or any other blockages.
Remote control
transmitter
Remote control
receiver
or
Flat-head
screwdriver
Reference