Toto T112H Скачать руководство пользователя страница 1

Installation Manual

03F10RN  T1

2021.4 

Flip-Up Type Handrail for Public Use

Follow the instructions in this installation manual to fully fulfill the functions of this product. After installation, give full explanation on how to use this product to the customer. 

1

1. Safety Precautions 

(Be sure to observe these instructions.)

Please read these “Safety Precautions” before installation, and install the product correctly.

WARNING

 This instruction manual shows various symbols to 

correctly install the product in order to prevent harm to 
customers and other users, and damage to property.
The meanings of those symbols are as follows: 

 The following symbols are used to classify 

and explain instruction that must be followed. 

When this appears next a topic, this 
indicates that ignoring this symbol 
and mishandling the product could 
result in death or serious injury. 

The       symbol indicates 
something that is “Prohibited.”
The symbol on the left indicates 
“Do not disassemble.” 
The       symbol indicates 
something that “Must be 
implemented.” The symbol on 
the left indicates “Required.” 

Prohibit

Do not

disassemble

T112H Type
T113H Type
T114H Type

Required

TO

TO

-designate

d

Reinforcement

WARNING

Required

No

backlash

WARNING

Do not install the product in places where water 
may be splashed over the product or in humid 
places, including outdoor and in a bathroom.

Doing so could cause the functions of the movable handrail to be 
damaged and may result in injury. 

When the product is used in wet areas such 
as a restroom, be sure to apply sealant 
around the mounting holes.

If sealant is not applied, water may enter the back of the wall 
and cause the product to come off or the wall to collapse, 
which could result in user’s fall and injury. 

Be sure to use TOTO-designated fixing 
brackets.

If TOTO-designated fixing brackets are not used, the 
handrail may come off or the wall may collapse, which could 
result in user’s fall and injury. 

Make sure that the base has sufficient 
thickness and is reinforced, and install the 
handrail by the specified installation method.

If the base does not have sufficient thickness or is not 
reinforced, and if you do not follow the specified installation 
method for each base, the handrail may come off or the wall 
may collapse, which could result in user’s fall and injury. 

Make sure that the handrail has no backlash 
after the installation is complete.

If the handrail has backlash, it may come off or the wall may 
collapse, which could result in user’s fall and injury. 

Anyone other than service engineers must not 
disassemble, repair, or modify the product.

Failure to observe this warning could cause a user to fall due to the 
damage or coming-off of the handrail and may result in injury. 

Be sure to install this product on a strong wall 
or building structure.

If the product is installed directly on a wall that is not strong enough, 
including a soil wall and a gypsum board wall, it may come off or the 
wall may collapse, which could result in user’s fall and injury. 

Содержание T112H










Отзывы: