28
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
You can remove the main unit to clean
the top of the bowl unit and the bottom of
the main unit.
Soft cloth soaked in water
Toilet paper, etc. (May cause damage.)
1
Unplug the power plug.
If the power is not unplugged, the unit
may malfunction or cause a failure or
electric shock.
2
Remove the main unit.
•
Do not pull the unit with undue force
(because the water supply hose and
power cord are attached).
Main unit
removal button
Pull the main unit toward
you while pressing the
"Main unit removal button".
Base plate
Bolt
Top of the bowl unit
3
Clean the top of the bowl unit and the bottom of the main unit.
•
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth soaked
in water so that no detergent remains.
4
Mount the main unit.
•
Be careful not to pinch the cords between the main unit and the base plate.
CAUTION
Push the main unit fi rmly on to the
base plate until a click sound is heard.
(Failure to do so could cause the main unit
to come loose and fall resulting in injury.)
After mounting, check that the main unit
does not detach even when pulled.
Click
Align the main
unit with the
center of the
base plate and
press it fi rmly
onto the base
plate until a click
sound is heard.
Base plate
5
Insert the power plug.
•
The "Power" LED lights up.
Maintenance
Gap between the Main Unit and Bowl Unit
M08049-1_EN.indd 28
M08049-1_EN.indd 28
10/5/2017 1:09:37 PM
10/5/2017 1:09:37 PM
