Toto NEOREST, Инструкция по эксплуатации

Страница: 31 / 34

60 61
Reference
Troubleshooting
Toilet Seat and Toilet Lid
Trouble Please check
Ref.
Page
Cannot open or close
with the remote
control.
g
If automatic opening works
● ➞
Check “Is the remote control working?”
If automatic opening does not work either
●
The toilet seat or toilet lid may not be mounted correctly.
x
Mount them correctly.
➞
Incorrect detection may occur when operating under fl uorescent lights.
●
55
31
The toilet seat does
not get warm.
Incorrect detection may occur when operating under fl uorescent lights.
●
Is the toilet seat temperature set to “OFF” or a low level?
●
22
p
Is the ENERGY SAVER LED (green) lit and is the SEAT LED off?
●
Timer energy-saver is operating and has turned off the toilet seat heater.
x
When you sit on the seat, the heater is turned on temporarily and the seat
➞
is warmed in about 15 minutes.
Is the ENERGY SAVER LED (orange) lit?
●
If the SEAT LED is lit as well: Auto energy-saver is operating
x
When you sit, the toilet seat is temporarily heated.
➞
24
When you sit, the toilet seat is temporarily heated.
➞
Have you been seated for a long time?
●
After about 20 minutes of sitting, the temperature starts going down, and
x
after about 1 hour, the heater is turned "OFF".
➞
Move away from the toilet
seat and then go back.
–
seat and then go back.
The seat sensor may have diffi culty detecting some sitting postures.
●
Sit back on the toilet seat.
➞
11
Sit back on the toilet seat.
Is a toilet lid or seat cover installed?
● ➞
Remove any covers. –
Energy-Saver
Trouble
gy
Please check
Ref.
Page
The timer energy-
saver feature is not
working.
Page
Did you replace the remote control batteries?
●
When the batteries are discharged, the settings may be erased.
x
Reconfigure the setting.
➞
14
26
working.
The auto energy-
saver feature is not
working.
g g
Because the function takes several days learning the usage conditions before
●
starting energy-saver, the amount of energy saving may be low, depending
on the frequency of use.
➞
Check the type of energy-saver.
24
Deodorizer
Trouble Please check
Ref.
Page
The deodorizer is not
working.
Page
Even after sitting down, you do not hear operation sounds.
●
Sit back on the toilet seat
➞ ➞
Set the deodorizer settings to "ON".
If you hear an operation sound when you sit on the toilet seat.
●
Clean the deodorizing filter.
➞
46
34
A strange odor is
emitted.
Clean the deodorizing filter.
➞
34
Are you using an air freshener or deodorizer that you purchased separately?
●
Doing so may reduce the effectiveness of the Washlet deodorizer or cause
x
strange odors.
Remove the air freshener or deodorizer.
➞
–
The deodorizer is not
working.
Remove the air freshener or deodorizer.
➞
Is "DEODORIZER" set to "OFF"?
● ➞
Set to "ON". 46
Sanitary
Trouble
y
Please check
Ref.
Page
The soft light, bowl
unit LED and CLEAN
indicator do not light
up.
Page
Is the setting "OFF"?
● ➞
Set to "ON".
If the CLEAN indicator LED is off, it is time to replace the component that
●
generate a "". (Replacement will be charged)
Consult with the installer, the seller, or the contact referred on the back cover
of this manual.
(Frequency of use is assumed that a family of four, 2 male and 2 female)
48
–
The pre-mist sprays
out spontaneously.
(Frequency of use is assumed that a family of four, 2 male and 2 female)
When body sensor A detects someone, the pre-mist is sprayed.
●
When the bowl has not been cleaned in 8 hours, the mist is sprayed inside
●
the bowl unit automatically.
–
Others
Trouble Please check
Ref.
Page
Water is leaking
from the plumbing
connections.
Page
If any nuts in a connection are loose, fi rmly tighten them with a tool such as a
●
monkey wrench.
If the water leak does not stop, close the water supply valve and seek
➞
repair.
–
The top unit is
unstable.
repair.
There is clearance between the toilet seat cushion and the bowl unit for
●
activating the seat sensor. When you sit on the toilet seat, the toilet seat
subsides slightly to activate the seat sensor.
11
Water splashes up
when using the toilet
subsides slightly to activate the seat sensor.
The water in the bowl unit that is used to mask the smell of excrement is the
●
cause of the splashing.
Adding a layer of toilet paper on the surface of the water can slightly
➞
dampen splashing.
–
When cleansing, you
hear a squishing
sound underneath the
fl oor.
p p g
Flush the toilet and check for sounds coming from the discharge pipe. Use a
●
device that maintains the necessary toilet water level.
–
fl oor.
When you fl ush, you
hear a gurgling sound.
When the toilet is fl ushed together with waste material, the sound is a result
●
of air, waste material and water being pulled through the system.
–