2
ENGLISH
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO!
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and function
as a guiding principle. Congratulations on your choice.
Thanks for Choosing TOTO
®
! ........................................................................................... 2
Warnings.............................................................................................................................. 2
Before Installation ............................................................................................................... 2
Installation Procedure ........................................................................................................ 3
After Installation ................................................................................................................. 3
Warranty .............................................................................................................................. 4
BEFORE INSTALLATION
The floor must be level and the wall must be square with the floor for best results.
Use the recommended wall carrier listed on the Spec Sheet. Install it per
manufacturer’s instructions and local codes.
WARNINGS
When this symbol appears in the manual, be aware that potential
misoperations may cause personal injury and/or property damage.
WARNING
For installation with bracket (optional for LT307 only),
provide proper
reinforcement, such as a brace, between the studs of the wall to securely mount
the bracket and to support the lavatory.
1. Position the mounting bracket at the appropriate height, H (see Ill. 2) for
installation. Use a pencil to mark the center of the slotted holes on the
bracket.
2. Drill pilot holes for the wood screws (mounting screws not provided) at the
marked locations.
3. Secure the mounting bracket to the wall using the bottom slots only.
H
Ill. 1 Carrier Installation
H
Ill. 2 Bracket Installation
For installation with carrier (required for LT308),
install the carrier arms at the
appropriate height. To determine arm height, (H), use the hole to rim distance
as shown on the Spec Sheet.
