3
ENGLISH
Screw
Plaster Guard
INCLUDED PARTS
* Actual product may vary in appearance depending on the model.
Check to make sure that all these parts were included in your packaging:
INSTALLATION PROCEDURE
1.
Confirm that the valve has been
installed properly.
N OTE: The finished wall surface should
be between the min and max markings
on the plaster guard. See the TSMA
installation manual for further information.
Plaster Guard
Screw
2.
Remove the screw securing the
plaster guard to the valve body,
then pull the plaster guard outwards
to remove it.
Handle Assembly*
Escutcheon*
Threaded Extension
Adapter
Collar
Screw and Lock Washer
3-3/4" [95mm] MAX.
2-1/2" [65mm] MIN.
FINISHED WALL
SURFACE
ARROW MUST
POINT IN
DIRECTION OF
WATER FLOW
MIN./MAX.
MARKINGS
