48
What to Do?
If there is no water due to a power outage or water failure
■
If a power outage occurs
Press the button on the
fl
ush panel to
fl
ush.
Flush panel
■
If a water outage occurs
1
Use a bucket to
fl
ush water.
Large bucket
Newspaper,
dustcloth, etc.
Pour strongly,
aiming at the center
of the bowl unit.
2
If the water level is low after
fl
ushing,
add more water.
Prevents odors.
Attention!
●
If there is a water supply failure, set "Auto bowl unit cleaning" to "OFF".
●
When the water supply is restored, be sure to perform a
fl
ush.
(To prevent waste from remaining in the drain pipe.)
If you cannot operate with the remote control
■
Operation is also possible using the
buttons on the control panel.
Control panel
■
If the low battery
warning LED is
fl
ashing, replace the
batteries.
Low battery warning LED
■
Replacing the batteries
1
Press [POWER ON/OFF] on the control panel.
The [POWER] LED goes off.
2
Remove the remote control from the hanger.
(Page 14)
POWER LED
Control panel
3
Open the cover and replace the AA batteries.
(Page 14)
4
Mount the remote control in the hanger.
5
Press [POWER ON/OFF] on the control panel.
The [POWER] LED lights up.