Toto CT994CEFG01, Инструкция по эксплуатации

Страница: 32 / 60

32
Maintenance
Bowl Unit
When the toilet bowl repels water or tends to get dirty
(SN996MX only)
●
The toilet bowl surface needs to be cleaned.
➞
Clean with a toilet brush or the like using commercially available hydrochloric acid-based or inorganic
acidbased detergent.

For daily cleaning, use neutral detergent.
●
Caution with use of detergent (Page 31)
Bowl Unit
(Approximately daily)
 
Toilet brush
 
Neutral toilet detergent
 
Strongly acidic cleaners or
strong alkaline cleaners
 
Cleaners containing abrasive
compounds
 
Fluoride-based detergent
(containing hydrogen
fl uoride
or ammonium fl uoride)
  Wire brush
 
Abrasive nylon scrubbing brush
1
Unplug the power plug.
2
Clean with a toilet brush or a similar tool.
■ If the bowl unit is clogged

Using plunger or similar, provide 10 cm (0.33 ft) or more clearance between the top of the bowl unit and the
water surface. Use commercially available tools that are made for unclogging the bowl unit.
(May cause over
fl ow of dirty water and water damage.)
Vinyl sheet, etc.
Keep 10 cm (0.33 ft) or more
■ If the fl oor is dirty

Clean it with a well wrung cloth. (Not cleaning the fl oor may cause stains or corrosion.)

Sitting is recommended to reduce splashing caused by standing and urinating.
3
Insert the power plug.