11
1. Gateway
In this mode, the device connects to the internet via an ADSL/Cable Modem. NAT is
enabled and PCs on LAN ports share the same IP Address to the ISP via the WAN port.
The connection type can be setup on the WAN page using PPPOE, DHCP client or static
IP.
2. Repeater Bridge
In this mode, all ethernet ports and wireless interfaces are bridged together and the NAT
function is disabled. All WAN related functions, including the firewall, are not supported.
3. Repeater WISP
In this mode, all ethernet ports are bridged together and the wireless client will connect to
the ISP access point. NAT is enabled and PCs on Ethernet ports share the same IP to the
ISP via the wireless LAN. You can connect to the ISP’s AP on the Site-Survey page. The
connection type can be setup on the WAN page using PPPOE, DHCP client or static IP.
4.5 Network
Содержание wireless N router
Страница 1: ...User Manual Wireless N ADSL2 Modem Router...
Страница 37: ...User Manual Wireless N ADSL2 Modem Router...
Страница 73: ...User Manual Wireless N ADSL2 Modem Router...