34
Local Time:
it shows the current time by default.
Enable NTP: NTP
means Network Time Protocol which is used to make the computer time
synchronized with its server or clock source, such as Quartz and GPS. It can provide
high-precision time correction and prevent harmful protocol attack by confirming encryption.
You need to check this box to activate this page.
Time Zone:
Select the Time Zone where the router is located.
Default NTP Server:
Please choose the corresponding NTP server to get right time. This is
optional.
5.6.4 Upgrade Firmware
This page allows you to upgrade the Access Point firmware to new version. Please note:
DO NOT power off the device during the upload because it may crash the system.
Current Firmware Version:
shows the current firmware version.
Firmware Date:
the date that you upgrade the current firmware.
Firmware Upgrade:
select the firmware version on your computer then click
Apply
to
upgrade the firmware version.
5.6.5 Save/Reload Setup
This page allows you to save current settings to a file or reload the settings from the file
which was saved previously. Besides, you can reset the current configuration to factory
default.
