20
Authentication:
One of the following authentication modes should be selected if WEP
security method is used:
Open System
—station is authenticated automatically by AP.
Shared Key
—station is authenticated after the challenge, generated by AP.
Encryption:
64-bit (selected by default) or 128-bit WEP Key length should be selected.
The 128-bit option will provide a bit higher level of wireless security.
For 64-bit
—specify WEP key as 10 Hex (0-9, A-F or a-f) characters (e.g. 00112233AA)
or 5 ASCII characters.
For 128-bit
—specify WEP key as 26 Hex (0-9, A-F or a-f) characters (e.g.
00112233445566778899AABBCC) or 13 ASCII characters.
Encryption Key:
set a password for this router
’s wireless connection.
5.3.2.2 WPA/WPA2
WPA2 means Wi-Fi Protected Access 2, it is the current most secure method of wireless
security and required for 802.11n performance. Please set one Encryption key (password)
for your wireless network to prevent being occupied by others.
WPA2:
it means Wi-Fi Protected Access 2, it is the current most secure method of wireless
security and required for 802.11n performance. This mode allows you to choose
TKIP+AES
Algorithm.
WPA Algorithms
TKIP
--Temporal Key Integrity Protocol is one cipher for data encryption supported by
WPA.
AES
--also know as CCMP, Counter Mode with Cipher Block Chaining Message
Authentication Code Protocol, which uses the Advanced Encryption Standards (AES)
algorithm.
