TM-P2LX User’s Manual
B. Note to Installing the Mainboard
Touch the non-coated area on the computer case or use a grounded wire to
release static electricity before you open the anti-static electricity bag and
take out the mainboard. It's likely to damage the mainboard components
while taking out the board without first releasing static electricity. During
installation, avoid touching the components on the mainboard.
C. CPU Voltage and Frequencies
ROM PCI/ISA BIOS (2A69JTJ9)
CHIPSET FEATURE SETUP
AWARD SOFTWARE, INC
Auto Configuration
: Enabled
CPU Speed
: Manual
DRAM Speed Selection
: 60ns
CPU Ratio
: X 3.5
MA Wait State
: Slow
CPU Frequency
: 66 MHz
EDO RAS# To CAS# Delay
: 3
Auto Detect DIMM/ PCI Clk
: Enabled
EDO RAS# Precharge Time
: 3
Spread Spectrum
: Disabled
EDO DRAM Read Burst
: x333
CPU Warning Temperature
: Disabled
EDO Dram Write Burst
: x222
Current CPU Temperature
: 28
℃
/ 82
℉
CPU-To-PCI IDE Posting
: Enabled
Current SYSFAN Speed
:4285 RPM
System BIOS Cacheable
: Enabled
Current CPUFAN Speed
:4000 RPM
Video BIOS Cacheable
: Enabled
Current Vin3 (V)
: 2.88V
Video RAM Cacheable
: Disabled
8 Bit I/O Recovery Time
: 1
16 Bit I/O Recovery Time
: 1
Memory Hole At 15M-16M
: Disabled
Passive Release
: Enabled
Esc : Quit
Selection : Item
Delayed Transaction
: Disabled
F1 : Help
PU/PD/+/- : Modify
AGP Aperture Size (MB)
SDRAM RAS-to CAS Delay
SDRAM RAS Precharge
Time
SDRAM CAS latency Time
: 64
: Fast
: Fast
: 3
F5 : Old Values (Shift) F2 : Color
F6 : Load BIOS Default
F7 : Load Setup Default
Dear Customers:
Thank you for your patronage of our products. The board you bought is a
jumper-less
mainboard. The ratio and frequency of the CPU shall be set in
BIOS and the working voltage for the CPU shall be automatically detected.
Please read carefully the following instructions:
1. Power on the installed system and press the "DEL" key to enter BIOS
Setup. Select "Chipset Features Setup" and press <Enter>.
3
