Totem CLASSIC Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 26

Totem CLASSIC Скачать руководство пользователя страница 3

3

a t o t a l v i e w o f f i r e

1

Installation guide

1.1

Preamble

We recommend that you read these instructions carefully before installing your appliance.

The TOTEM FIRE SAS company recommends that you entrust installation of its appliances to a qualified
professional.

1.2

Warning

These instructions concern TOTEM "Classic" appliances

TOTEM enclosed fireplaces comply with standard EN 13229

Characteristics of your Totem fireplace according to standard EN 13229:
Intermittent
Combustion on grate
Exclusively wood burning
Enclosed firebox
Firebox around which the brickwork will be assembled

A fireplace equipped with a TOTEM firebox must be fitted in compliance with all of the documents supplied
with the appliance. The instructions only apply to the construction of a fireplace equipped with a firebox
using firewood as a fuel, in a single family dwelling.

All local and national regulations, as well as European standards, must be observed when installing
and using the appliance.

IMPORTANT:

Before installing the fireplace, it is necessary to first check its immediate environment,

notably whether or not:

- the characteristics of the chimney flue (shown on its information plate) are compatible with the

characteristics of the fireplace.

- the distance to combustible materials has been observed

- the characteristics of the materials making up the walls against which the fireplace is mounted

comply with regulations in force.

- the combustion air duct, measuring 200 cm², necessary for correct functioning of the appliance

exists, and is correctly proportioned.

- the mechanical strength of the floor is sufficient for the weight of the fireplace equipped with a

firebox.

«
1
2
3
4
5
...
»

Содержание CLASSIC



























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды