Totally Wicked OPTIMUS, Руководство пользователя

Страница: 13 / 19

24 25
Additional Settings:
Enabling and Adjusting PREHEAT:
The preheat function provides an
additional boost of power for a
limited period after the power button
is first pressed. This enables the
Optimus to produce vapour faster,
especially when the overall power
for vaping is set low. Press and hold
the power and right adjustment
buttons at the same to enter the
ENU/TIME OUT/PREHEAT menu.
“PREHEAT” will be displayed initially.
Press the power button to switch
between ’PWR’ and ’TIME’. While
’PWR’ is highlighted press the left
adjustment button once, then use
either of the adjustment buttons to
adjust the preheat wattage, which
can be adjusted in the range of the
current set wattage up to 200 watts.
While “TIME” is highlighted, press
the left adjustment button once,
then use either of the adjustment
buttons to set the duration of the
preheat function, which can be
adjusted from 0.1 – 2.0 seconds, or the function turned off completely.
Leave the Optimus idle to confirm
any changes.
Adjusting and Enabling TIME OUT:
The period of time the device will
operate when the power button is
held down is limited to 10 seconds
as standard, and can be adjusted.
Press and hold the power and right
adjustment buttons at the same to
enter the ENU/TIME OUT/PREHEAT
menu. “PREHEAT” will be displayed
initially. Press the right adjustment
button and “TIME OUT” will be
displayed. Keep pressing the left
adjustment button to select the
timeout duration, which can be from
5 to 15 seconds. Press the power
button to confirm your selection.
When the unit has powered an
atomizer head for the TIME OUT
period, “OVER X S PROTECT” will
be displayed (where X is the TIME
OUT period) and the device will
switch off. Quickly pressing the
power button 5 times will switch the
Optimus back on allowing normal
operation to resume.
Using Your Optimus Kit Using Your Optimus Kit