26
27
REPLACING THE GLASS
• Remove the tank from the Intu Pro battery.
• Insert the small screwdriver blade end of
the tool provided in the filler release button,
push in fully and turn clockwise through
almost 90 degrees to lock in place.
• Slide the top cap in the direction indicated
by the arrow symbol and lift off.
• Insert the larger screwdriver end of the
tool into the recessed slot in the retaining
screw, and turn anti-clockwise until
completely released.
• Lift off the top section of the tank, taking
care not to lose the retaining screw.
• Remove the glass from the base cap
and ensure the tank top and bottom
seals are in good condition.
• When fitting a new glass, note that the
recesses at each end are different depths.
Fit the deeper recessed end of the glass
to the base cap, then place the top section
of the tank back onto the glass.
• Use the tool to turn the retaining screw
clockwise and tighten securely.
• Reattach the top cap of the tank with the
arrow symbol in alignment with the filling
port and then slide the top cap back over
the tank.
• Insert the small screwdriver blade end
of the tool in the filler release button, and
turn through almost 90 degrees anti-
clockwise so that the release button springs
back out to normal closed position. The
top cap travel will now be limited so that it
cannot be removed accidentally.
USING YOUR INTU PRO
1
1
1
2
2
2
TW_INTU-PRO_manual.indd 26-27
TW_INTU-PRO_manual.indd 26-27
13/09/2021 13:02
13/09/2021 13:02
