Totally Wicked ARC EVO, Руководство пользователя

Страница: 7 / 19

12 13
CHARGING THE BATTERY REPLACING ATOMIZER HEAD ADJUSTING AIRFLOW E-LIQUID LEVEL
If you find the air flow too airy or too
tight while vaping, rotate the airflow
control ring located on the tank base.
Experiment by rotating the air flow
control ring to find your preferred
setting. To prevent the atomizer head
from becoming dry and burning
prematurely, ensure the amount of
e-liquid inside the Slider 2 tank does
not drop below the fluid feed holes
located on the sides of the atomizer
head. The arc evo is charged by connecting
the charge port on the battery to a
USB port or suitable wall adaptor
with the supplied charging lead.
The battery icon will begin to flash
onscreen for 30 seconds when the
charge lead is first connected. This
will then be replaced by a full screen
flashing battery icon. Once the
battery is fully charged the screen will
switch off completely. To replace the atomizer head, remove
the Slider 2 Tank from the arc evo
battery by unscrewing from the tank
base. Turn the tank upside down,
unscrew the tank base from the glass
section of the tank. Unscrew the
atomizer head from the atomizer base
and replace. Prime the new atomizer
head by following the steps outlined
in
Priming on page 6. Refit the tank
base onto the glass section of the
tank, refit the assembled tank back
onto the battery.