TROUBLESHOOTING
•
Touch screen buttons do not function properly.
Remove cover, press the reset but-
ton located in the bottom left corner then accurately touch 3 target centers on the
screen when prompted.
•
Air Conditioning does not turn on even when room temperature is higher then the
temperature set point set point (Humidity models only).
DHCONTROLCOMP is turned
ON and dehumidify set point has been reached. This will cause air conditioning to
turn off. Lower Setpoint – Page 26, Dh CONTROLCOMP – Page 45.
•
Air conditioning turns on in HEAT mode and heating turns on in COOL mode.
Reverse
the OBW valve (see “Advanced Settings” Page 42).
•
PARTIAL LOCK and FULL LOCK do not function.
You must not touch the screen
for 1 minute for TotalTouch™ to automatically lock.
•
I forgot my PIN and cannot unlock the thermostat.
Remove the cover plate, press
the reset button located in the bottom right corner, as soon as the message “touch
to reset password” appears touch the screen, your PIN will be erased and the ther-
mostat will unlock.
39
SIMPLE THERMOSTAT MODE
>
TOTALTOUCH™ CAN ALSO FUNCTION AS A NON-PROGRAMMABLE
THERMOSTAT AFTER IT HAS BEEN CONFIGURED.
•
To enable “Simple Mode”, press the reset button (take off the thermostat face-
plate and press the reset button located in the bottom right-hand corner). The
message “Touch for simple thermostat” will appear. Touch the screen, and
TotalTouch™ becomes a simplified non-programmable thermostat.
•
Please note that when changing to Simple Mode, you will not lose any of the
settings you have previously entered in the “Programmable Mode”.
•
To revert back to the Programmable TotalTouch™ Thermostat, simply press
the reset button and touch the screen when the message “Touch for
Programmable Thermostat” appears.
Simple Mode has the following basic features:
Temperature Control Modes:
Fan Operation Modes:
38
