Telescoping Squat Stand
20
Removing or Folding the Telescoping Squat Stand
Telescoping Squat Stand
1. Lift the release lever on the back of the telescoping squat stand. Adjust the
squat stand to the desired level by aligning it over one of the sets of holes
in the folding platform. Release the lever to lock it in place.
Folding the Folding Platform
Pull the pin on the left side then fold the squat stand down. Reverse the
process to unfold or rotate it out for use.
2. Inspect the lever and pull up on the squat handle to ensure the squat
stand is locked in on both sides.
Folding Platform Removal
1. Remove the squat stand from the folding platform posts and set it aside.
2. Pull the index pin (the lower squat fold pull pin on the left side as show)
and tilt the folding platform slightly toward the glideboard as shown below.
3. Pull the pin on the right side of the folding platform and rotate the posts to
the left until the right pin is slightly above the rails.
4. Move the folding platform to the left until the fixed pin on top comes out of
the hole in the lower rail, then lift off the folding platform.
Note: This process may be done with the squat stand still attached to the folding
platform, however it is more difficult and requires familiarization, more strength and
dexterity.
Index PIn
Содержание GTS
Страница 3: ...Owner s Guide 1 OWNER S GUIDE PowerTower GTS Sport ...
Страница 34: ...32 ...