TotalGym GTS, Руководство пользователя

Страница: 20 / 40

Unfolding
18
1. Unlatch the rails from the tower.
2. Standing at the side of the unit, with one hand behind the tower and the
other hand on the glideboard, tilt the unit slightly backward and use your
foot to push the rail base away from the tower. As the rails begin to lower,
the tower will follow the upper rails forward and then it will begin to pull
away from the rails, backward to an upright position.
3. When the tower begins to pull away from the upper rails, grasp the upper
rail where indicated on the inside of the rail just above the hinge (indicated
on both sides) and continue to unfold the rails and lower them to the floor.
As the rails straighten, guide the glideboard rollers into the groove of the
upper rail if needed.
Caution! As the rails get close to the floor, the rails feel heavier. To avoid
pinching the rollers in the hinges, do not drop the rails.
Unfolding
WARNING:
The tower is designed to open automatically by pulling away
from the upper rails as the rails begin to unfold. Do not force or
push the tower away from the rails, as this will cause the tower to
fall backward.
Grasp Here While
Lowering
Hold Glideboard
Push Rail Base
Here with Foot
Hold Tower
Grasp Here