TotalFlow Print Server R-60, Руководство по эксплуатации

Страница: 75 / 220

4
73
Changing a Virtual Printer
You can change an existing virtual printer so that you can use it for a different job or if the requirement
for an existing job changes.
To change a virtual printer:
1. On the Configuration hub, click the Network tab and find the Virtual Printers pod.
2. Click the name of the virtual printer that you want to change and click , the edit icon.
3. Update the options as needed.
For information, see the balloon help.
The [[W WSSD D]] and [[A Ap pp plleeTTa allkk]] job submission methods can be enabled for only one virtual printer
at a time. [[RRa aw w p poorrtt]] can be enabled for several virtual printers, but each one must use a different
port number.
4. Click [[O OK K]].
Deleting a Virtual Printer
You can delete an existing virtual printer when you no longer need to use it.
To delete a virtual printer:
1. On the Configuration hub, click the Network tab and find the Virtual Printers pod.
2. Click the name of the virtual printer that you want to delete, then click , the delete icon.
3. Click [[Y Yeess]] to confirm the action.
Setting Virtual Printer Defaults and Overrides for Job Properties
You can associate default and override values for job properties with a virtual printer.
When the virtual printer receives a job, the job uses the virtual printer defaults for properties that do not
have a value. It uses the virtual printer overrides for all job properties instead of the values in the job
ticket.
To set virtual printer defaults and overrides for job properties:
1. On the Configuration hub, click the Network tab and find the Virtual Printers pod.
2. Click the name of the virtual printer that you want to change and click , the edit icon.
3. Click [[JJoob b PPrroop peerrttiieess]] to open the Job Properties Editor.
4. Enter or select values for any properties that you want to set.
For information about job properties, see the balloon help.
Changing a Virtual Printer