3
4
1
2
Specifications
Please read the following opearational precautions before use.
Safety instructions
1. Read instructions - Read this user manual thoroughly before attempting to operate the
Home Sunshine Lite.
2. Retain the user manual for future reference.
3. Heed all warnings on this product.
4. Follow instructions - All operating and usage instructions should be followed.
5. TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY OF THE SCREWS OR
TRY TO DISASSEMBLE THE PRODUCT. THERE ARE NO SERVICEABLE PARTS INSIDE THIS
PRODUCT.
6. Do NOT expose the parts to liquids or solvents.
7. Do NOT expose the parts to excessive dust or vibrations.
8. Place the product on a stable, level surface. Do not drop, apply excessive force to the
controls, or put heavy objects on top of the product.
9. Make sure the solar panel is correctly attached to a solid structure. Excessive wind may
cause panel to fly over, if needed, take panel inside during strong wind to avoid damage or
harm.
10. Only clean with dry cloth or lightly damp cloth without any solvent.
11. WARNING: To reduce the risk of fire or electric shock, do not expose the product to rain or
mold for long periods.
12. WARNING: The product is designed for indoor use. Continuous outdoor use may cause
water damage.
EN
Power station
number of rechargeable battery cells
: 2 cells (LiFePO4) * 26650 -
total battery capacity
:
6.4 V, 3600 mAh
Solar panel
nominal power
: 6 W -
maximum power (Pmpp)
: 6 Wp -
cut-off current (Voc)
: 10.8 V -
short
circuit current (Isc)
: 0.73 A -
output rating
: 9 V, 0.66 A -
type
: polycrystalline -
dimension
:
185mm x 285mm x 17mm -
cable lenght
: 5 M
Light bulb
brightness
: 200 lumens/each -
daily solar runtime
: 5 hours with two lights, 10 hours with
one light -
power consumption
: 2 W/each -
rated operating voltage:
6 V -
number of LEDs
:
6 per bulb
Install and use your Home Sunshine Lite
1
2
Put the power station on a stable surface
Get to know your Home Sunshine Lite
Power station
6 W solar panel
charge indicator
on/off
5M charging cable
solar panel port
USB port
lighting port
Light bulbs
light bulb
Charging cable
Output
mobile phone
and other devices
Input
power station’s
USB port
Fully charge the battery
before first time using.
1
1
Clean your kit
2
Note
Put the solar panel on a stable
surface, facing the sun then
connect the solar panel cable to
the power station input port
3
Connect and
position light
bulbs
Plug in
Screw
Position
1
2
3
Daily charge is highly recommended to
maintain the best performance.
Charging performance will be reduced in rainy
days, cloudy days and under shade.
Wind can damage panel, in case of strong
wind, fix panel strongly to avoid breaking.
This product is not waterproof. Keep away
from fire.
5
Charge out for USB devices
Connect your USB device to the USB
port with the charging cable provided.
1
4
Connect light bulbs to power station for power
1
2
3
Press the main swith to turn on the Home
Sunshine Lite.
Connect the light to the port on the power
station.
Press the switch to turn on the lights.
2
Your USB device will start charging.
Maintenance of your Home Sunshine Lite
1
2
3
4
Turn of the Home Sunshine Lite and clean
with dry/lightly damped cloth regularly to
remove excessive dust and to maintain
charging performance.
Do not use detergent.
Do not expose the products
to too much water.
light bulb
