Total TS3006, Руководство пользователя, Страница: 4 / 10

4
Safety rules for correct use
Double insulation for additional protection
Please read the instruction manual before use.
CE conformity.
Wear safety glasses, hearing protection and a dust mask.
Waste electrical products must not be disposed of with household waste.
Please recycle at the appropriate facilities. Check with your local
authority or retailer for recycling advice.
Security alert. Use only accessories supported by the manufacturer.
Additional security warnings
You must observe the following basic safety precautions against electrical shock, injury,
and fire hazard when using power tools. Read and follow these instructions before you
start to use any tool. These instructions must be kept in a safe place.
•
The equipment must never be used in environments where there is an explosive
atmosphere.
•
Do not let the cable touch any part of the equipment. Use only the extension cord
approved for use in the work area.
•
Do not force the machine for unsuitable work, for example, grinding, planning,
etc. Otherwise, it is very likely to cause danger and damage.
•
Use only original spare parts when performing maintenance. Otherwise, safe
operation cannot be guaranteed.
•
The allowable speed of the attachments must be at least the same as the
maximum speed of the machine. Otherwise, they may break or crack when your
operating speed exceeds the allowable speed of the machine.
• Do not use damaged accessories. Before using the tool, always check the
accessories for nicks or cracks.
For example, for the polishing pad, check that the backing plate is not cracked.
Make sure everyone is out of the working area of the machine and run the
machine at full speed for one minute and thoroughly check the attachments.
•
Do not leave the machine until it is completely stopped. Otherwise, you will lose
control of the machine.