Total TS3006, Руководство пользователя, Страница: 3 / 10

3
d. Prevent the tool from turning on unintentionally. Make sure the switch is
in the off position before connecting to power source and moving.
e. Remove any adjusting wrenches or wrenches before turning on the power
tool. An adjustable wrench or wrench placed in a rotating part of the power
tool can cause serious injury.
f. If devices are used for dust extraction and collection, make sure they are
properly connected. Properly use these devices and you will reduce dust-
related hazards.
g. Maintain posture and balance at all times. This allows for better control of
the power tool in unexpected situations.
4) Use and care of power tools
a. Do not force the tool. Use the correct power tool for each use.
b. Do not use the power tool if its power switch does not work. Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool to avoid accidental
starting.
d. Use the power tool, accessories and bits etc. in accordance with these
instructions, taking into account the working conditions and the work to
be carried out. Using the power tool for operations other than those
intended could result in a hazardous situation.
e. Store power tools out of the reach of children and do not allow people
unfamiliar with the tool to use it.
f. Carry out regular maintenance on power tools. Check for misalignment or
binding of moving parts, breakage of parts, and any other condition that
may affect the operation of power tools. If it is damaged, have the power
tool repaired before using it. Many accidents are caused by poorly
maintained power tools.
g. Periodically clean the air outlets of the power tool. The motor fan will draw
dust into the housing and excessive dust buildup can cause electrical
hazards.
h. Keep accessories clean and sharp, as with proper maintenance they are
less likely to bind and are easier to control.
5) Service
a. Have your power tool serviced by a qualified person and use replacement
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.