background image

 

Security instructions

 

 

Caution 

Read all safety warnings and all instructions. Failure to follow all warnings and 

instructions may result in electrical shock, fire, and/or serious injury. 
The term “power tool” in the warnings refers to your mains-operated (corded) power tool 

or battery-operated (cordless) power tool. 

Note: Save all warnings and instructions for future reference. Due to our ongoing R&D&I program, 

the specifications in this document are subject to change without notice. 

 

1)  Work area safety 

a.  Keep the work area well lit to prevent accidents. 

b.  Do not use power tools in explosive atmospheres, such as in the presence 

of flammable liquids, gases, or dust that can cause fires. 

c.  Keep children and other unauthorized persons away while using a power 

tool. Distractions can cause you to lose control of the tool. 

 

2)  electrical safety 

a.  Avoid bodily contact with grounded surfaces such as pipes, radiators, 

ranges, and refrigerators. There is an increased risk of electric shock if 

your body is grounded. 

b.  Do not expose power tools to rain or wet conditions. Water entering a 

power tool will increase the risk of electrical shock. 

c.  Never use the cable to carry, pull or unplug the charger. Keep the cable 

away from heat or oil. 

d.  Before each use, check the tool for damage. 

 

3)  Personal security 

a.  Always stay alert, watch what you are doing and use common sense 

when using the tool. 

b.  Do not use a power tool if you are tired or under the influence of 

medication or other substances. 

c.  Wear personal protective equipment. Always wear eye protection. 

Protective equipment such as a dust mask, non-slip safety shoes, hard 

hat, or hearing protection used in the proper conditions will reduce 

personal injury. Also don't wear loose clothing or jewelry. 

d.  Prevent the tool from turning on unintentionally. Make sure the switch is 

in the off position before connecting to power source and moving. 

e.  The tool must not be used by persons who are not trained or who are not 

familiar with the  operating instructions. It should also not be used by 

children. 

f.  Wear sturdy footwear to protect against electrical shock. 

4)  Use and care of the battery tool 

a.  Recharge the battery only with the charger specified by the manufacturer. 

An unsuitable charger can create a fire hazard.

 

b.  Use power tools with specifically designated batteries. Use of other 

batteries may create a risk of injury or fire. 

c.  When the batteries are not in use, keep it away from other metal objects, 

such as paper clips, coins, keys, nails, screws, or other small metal 

Содержание TPWLI20084














Отзывы: