Total THSPP4161, Руководство пользователя

Страница: 4 / 6

4
•
Periodically clean the in-line filter inside the trigger to avoid blockages. This can
be done by unscrewing the hose from the trigger and pulling the filter out of the
trigger handle.
•
Rinse with clean water and reattach the trigger to the lever, squeezing firmly.
Storage
• Do not store with the contents in the tank. This will destroy the sprayer
mechanism.
•
Do not store pressurized. Lift the relief valve to relieve pressure.
• Store out of sunlight.
Problem solving
Problem Possible cause Solution
Poor spray pattern or
sprayer will not spray
Note: Blockages are the
most common reason for
sprayer failure.
1. Check the nozzle to
see if it is blocked
2. Inspect the trigger,
lance, hose, and pickup
tube for obstructions.
1. Remove the
mouthpiece and clean it
2. Remove and remove
any obstructions from
the trigger, lance, hose,
and pickup tube.
3. Remove the in-line
filter from the trigger and
clean it.
Air or liquid leak around
the pump assembly
1. Dirt in pump or
cylinder gasket.
2. Check that the gasket
is not worn or damaged.
1. Clean the gasket and
the surface of the pump
cylinder and tank where
the gasket sits.
2. Replace the gasket if
it is worn or damaged.
Sprayer does not
pressurize
1. Verify that the
pressure chamber is
installed correctly
2. Check the O-ring and
gaskets
1. Reinstall the pressure
chamber
2. Replace the O-ring
and gaskets if they are
missing or damaged.
Hose is leaking at tank
or trigger
1. Is the hose loose?
2. Check the hose for
cracks or holes.
3. Check that the hose
fittings are not
damaged.
1. Tighten the hose nuts
2. Replace the hose
3. Replace o-rings or
accessories
Nozzle tip is leaking
1. Check that the nozzle
tip is tight
2. Check the nozzle tip
for damage.
3. Missing or damaged
O-ring
1. Squeeze the tip of the
nozzle
2. Replace the nozzle
tip
3. Replace the o-ring
Sprayer starts spraying
when pumping
1. Trigger lock activated
2. Dirt around the trigger
1. Unlock the trigger
2. Clean the trigger