Total THSPP4161, Руководство пользователя

Страница: 3 / 6

3
Product description
Note: The spray nozzle has 3 options: single, double and fan)
Start up
• Before filling always check that the sprayer shoulder straps are properly
positioned and adjusted so that the sprayer sits comfortably on your back.
•
Attach the appropriate spray tip for the required spray pattern.
• Unscrew the fill plug, but do not remove the internal strainer.
•
Fill the tank with the required liquid to the required level. Do not exceed the "MAX"
fill level in the tank.
•
Replace the fill cap and tighten. Make sure all other accessories are tight before
use.
•
Pressurize the sprayer by pumping the lever 6 to 8 times. Stop pumping if it
becomes difficult to pump as you don't want to overpressurize.
•
Start spraying by holding down the trigger. For continuous spraying, the trigger
can be locked.
•
Continue to use the pump lever in a steady motion to maintain pressure on the
sprayer pump while spraying.
Cleaning and storage
Cleaning
For the longevity of the sprayer, follow these instructions after each use:
•
Release pressure by trigger.
•
Empty any leftover content safely.
Note: Even if the tank is empty, there may be residual liquid in the pump chamber. Empty
the chamber by locking the trigger and continuously pumping the lever several times.
• Fill the tank 1/4 full with clean water.
•
Pressurize and then hold the trigger to empty the entire tank through the nozzle.
• Thoroughly rinse all components with clean water.
1. Pump lever bracket
2. Pump lever
3. Pump assembly
4. Spray nozzle
5. Trigger
6. Hose
7. Filler cap
8. Transport straps
9. Tank
10. Tank base