Total TG1091156, Руководство пользователя

Страница: 6 / 13

6
•
Any large work piece should be clamped with the proper clamps to minimize the
risk of binding. Supports, clamps, “C” clamps, clamps or “F” clamps must be
placed on the edges of the workpiece at a safe and prudent distance from the
line of cut or gouging to be made.
• Use extreme caution when making a "pocket cut" in existing walls or other blind
areas. It may cut gas or water pipes, electrical wiring, or objects that can cause
kickback.
Sanding operations
•
Do not use oversized discs. Follow the manufacturer's recommendations when
selecting sandpaper. Sandpaper that extends past the sanding pad presents a
hazard and can cause binding and kickback.
Polishing operations
•
Do not allow the residue of any polishing flecks to spin freely. Please remove or
clip them because otherwise they may harm the work or your own body.
Wire brushing operations
•
Please note that the brush sheds wire bristles even during normal operation. Do
not overload the cables by applying excessive load to the brush. Wire bristles can
easily penetrate light clothing and/or skin.
• The use of a wire brush guard is recommended. The wire wheel or brush may
expand in diameter due to work load and centrifugal forces.
Other risks
Even when the power tool is used as prescribed, it is not possible to eliminate all residual
risk factors:
a. Health defects resulting from vibration emission if the power tool is used for a
longer period of time or if it is not managed and maintained properly.
b. Injuries and property damage due to broken fixtures breaking suddenly.
Caution
This power tool produces an electromagnetic field during operation.
This field can, in some circumstances, interfere with active or passive
medical implants.
To reduce the risk of serious injury, we recommend that persons with
medical implants consult their physician before using this power tool.
If the cable is damaged or cut during work, do not touch the cable, immediately unplug
the tool. Never use the machine with a damaged cable.
The machine must not be damp and must not be used in a humid environment.
Attention
Safe operation of this machine is only possible when the operating or
safety information is fully read and the instructions contained therein
are strictly followed.