background image

M2300U User’s Manual & Operating Instructions 

 

 

2.3.5 Batch number clearance 
Press  CLEAR  key to clear the preset batch number on the 
batch/parameter.  And the machine withdraws from the batching state. 

2.4 Setting the auxiliary functions 

Press “7777”, i.e. “7” for four times, to change the parameters of the 

machines, and the batch/parameter display will show “SEt”: 

2.4.1 Press “1” to enter the setting of UV detection 
The sensitivity of UV detection is adjustable by continuously pressing the 
“1” key, and the sensitivity will be changed from SU1 to SU15, (the 

default setting is SU7). The smaller the number follows SU, the higher the 

sensitivity of UV detection. 

2.4.2 Press “2” to enter the setting of Magnetic detection 
The sensitivity of Magnetic detection is adjustable by continuously 

pressing the “2” key, and the sensitivity can be changed from Sd1 to 

Sd15 (the default setting is Sd7). The smaller the number follow Sd, the 

higher the sensitivity of Magnetic detection. 

2.4.3 Press “3” to enter the setting of width difference of the banknotes 
The sensitivity of width difference detection is adjustable by continuously 

pressing the “4” key, and the sensitivity will be changed from dd1, dd2, 

dd3, dd4, dd5, dd6 and dd7 (the default setting is dd4). When the width 

difference between the bills is detected to be over the set parameter, the 

machine alarms and stops counting. 

2.4.4 Press “4” to enter the setting of banknotes density 
The sensitivity of banknote density is adjustable by continuously pressing 

the “4” key, and the sensitivity will be changed from dE1, dE2, dEN3, dE4, 

dE5, dE6 and dE7 (the default setting is dEN4).  
 

Please note: 

 

‰

 

For the sensitivity of counterfeit detection, the smaller the 

number, the higher the sensitivity. 

 

‰

 

If mis-alarm frequently occurred, please decrease the sensitivity of 

counterfeit detection, i.e. increase the number; if the machine 

Содержание M2300U

















Отзывы: