M2300U User’s Manual & Operating Instructions
7
Auxiliary function keys
Press “7” on the batch keypad for four times to enter the auxiliary
function setting:
1
.
to adjust the sensitivity of UV detection.
2
.
to adjust the sensitivity of magnetic detection.
3
.
to set the sensitivity of paper width
4
.
to adjust the sensitivity of paper density
2.2.2 How to position the feeding chink adjusting knob with a coin
Turn the coin clockwise (to “+”) to enlarge the feeding chink,
counter-clockwise (to “-“) to decrease the feeding chink
When the bills can not be counted smoothly, enlarge the feeding
chink (to “+”); when the machine stops with signals like “db”, “CH”
displayed, decrease the feeding chink (to “-“).
Please note: don’t rotate the adjusting knob to a large degree, and
only the inching movement is applicable.
2.2.3 How to adjust the paper guide
The width of the paper guide should be in accordance with that of
the bills that the machine is to count
When there’s width difference between the bills, please adjust the
paper guide to suit the present width of the bills, so as to avoid
mis-alarm.
2.3 Setting the main functions
2.3.1 Counterfeit detection
After the self-test for two seconds, the machine proves to be in the
normal condition, and both the indicator lights for UV and magnetic
counterfeit detection are on.
Press the UV/MG key, the indicator light of MG is turned off, and the
machine counts with UV-detection function only; Press UV/MG again,
both the indicator lights of UV and MG are turned off, the machine counts
without counterfeit detection.
Press the UV/MG key the 3 (third) time, both the counterfeit indicator
lights are on, showing the function of counterfeit detection through UV
and magnetic ink is enabled.
