Manual
Page 8
www.totalsheds.co.uk
Assembly Manual
Page 1 of 3
1st Roof Section
Now place the 1st of the 2 roof panels
as shown in the diagram below.
PLACE ROOF SECTION 1
PLACE ROOF SECTION 2
STEP • 11
STEP • 12
2nd Roof Section
Now place the 2nd roof panel as shown
in the diagram below.
DRILL
DRIVER
DRILL
DRIVER
Now secure down the roof and the base
adjusting where need be to make final
structure safe & solid.
Remember to drill the panels down to the
floor at this stage as all the build sections
are together now.
Secure roof panels by screwing them
down to kennel framework as shown.
72”
L
ength
(895.3mm)
(1765.3mm)
35.25”
Width
72”
L
ength
(895.3mm)
(1765.3mm)
35.25”
Width
= Drill Points using
screws provided as shown
x4
4.0 x 70mm
= Drill Points using
screws provided as shown
x4
4.0 x 70mm
© Sheds (Midlands) Limited 2021 •
6x6ft Dog Kennel
