Total Recall VR Classic Desktop
Page 15 of 32
The interface cards use RJ11C/RJ12/RJ14 (6P6C) connectors. Each connector has two
input lines, one line on pins 3 and 4 and another on pins 2 and 5 as shown on the
following diagram.
Figure 1: Analogue Connector Pin Assignment
Analogue line and recording channel numbering starts with the input lines on the left-
most connector where recording channel 1 and 2 map to input line 1 and 2 on the first
connector. The numbering then continues in lots of 2 with every adjacent connector.
The easiest way to connect Total Recall VR to the analogue telephone lines in order to
record telephone conversations is to use module “T” adapters which are readily
available from your local cable and accessories store.
The following diagram shows the connections between your telephones and PBX before
you connect Total Recall VR.
Figure 2: Analogue Telephone Connections (before)
The following diagram shows the connections after you connect Total Recall VR with
readily available “T” adapters.
