Total Recall VR Classic Desktop
Page 13 of 32
4.
Installation
4.1.
Safety Information
Always follow basic safety precautions when installing Total Recall VR to reduce the
risk of injury from electrical shock and fire.
WARNING: Potential shock hazard. Total Recall VR must be
installed by qualified person.
Observer the following:
1.
Read and understand all instructions in Total Recall VR guides.
2.
Observe all warnings and instructions marked on the product.
3.
Use only grounded electrical outlet when connecting Total Recall VR to a power
source. If you are unsure the outlet is grounded, then have a qualified electrician
check it.
4.
First connect Total Recall VR to grounded outlet, and only then connect the
appropriate interface lines.
5.
Do not touch the contacts on the ends of any cables used with Total Recall VR. If
any cable becomes damaged, then have it replaced immediately.
6.
Shut down and unplug Total Recall VR from telephone jacks, and then from power
outlets, prior to moving or cleaning.
7.
Do not open Total Recall VR. There are no user serviceable parts inside Total
Recall VR. Refer all servicing to qualified personnel.
4.2.
General
Total Recall VR is computer equipment and in general has the same physical and
electrical requirements as desktop PCs. Attention should be paid to their environment to
assure long life and reliable operation.
4.3.
Location
When choosing a location for your Total Recall VR, consider the following:
Convenience
. Make the unit accessible to operators and service personnel who
need to access the embedded display and control keypad.
Security
. User with access to the unit can remove power, disconnect other
cables, monitor and play recordings, create archives and possibly compromise
the recordings on Total Recall VR in other ways. Logins are no protection
against determined attackers with physical access to the unit.
