Tosot TM18H4O Скачать руководство пользователя

Страница: 15 / 80

Technical Information

Service Manual

Schematic Diagram of Free Match Series Inverter Heat Pump System

Heat Exchanger

Four-way Valve

Compressor

Silencer

Gas/Liquid Separator

Heat Exchanger

Heating

Cooling

Outdoor Uint

Indoor Uint

Electronic Expansion Valve

Schematic Diagram of Free Match Series Inverter Heat Pump System

The outdoor and indoor units start to work once the power is switched on. During the cooling operation,

the low temperature, low pressure refrigerant gas from the heat exchanger of each indoor unit gets together

and then is taken into the compressor to be compressed into high temperature, high pressure gas, which will

soon go to the heat exchanger of the outdoor unit to exchange heat with the outdoor air and then is turned into

refrigerant liquid. After passing through the throttling device, the temperature and pressure of the refrigerant

liquid will further decrease and then go the main valve. After that, it will be divided and go to the heat exchanger

of each indoor unit to exchange heat with the air which needs to be conditioned. Consequently, the refrigerant

liquid become low temperature, low pressure refrigerant gas again. Such a refrigeration cycle goes round and

round to achieve the desired refrigeration purpose. During the heating operation, the four-way valve is involved

to make the refrigeration cycle run reversely. The refrigerant radiates heat in the heat exchanger of the indoor

unit (so do the electric heating devices) and absorb heat in the heat exchanger of the outdoor unit for a heat

pump heating cycle so as to achieve the desired heating purpose.

High Pressure Swicth

Filter

Eutectic Stopper

Содержание TM18H4O

















































































Результаты поиска

Содержание TM18H4O

Отзывы:

Похожие инструкции для TM18H4O

Бренды по названию

Популярные бренды

Tosot TM18H4O, Руководство по обслуживанию

Результаты поиска

Содержание TM18H4O

Отзывы:

Похожие инструкции для TM18H4O

Бренды по названию

Популярные бренды