When removing the product from the brackets, be sure to support it with your hand.
Caution
Warning
Bracket
Head Rail
Hold in the
release button
Pull forward
Bracket
Head Rail
Hold in the
release button
Pull forward
Temporary stopper hook
Temporary stopper hook
Bottom Rail
Operation Cord
Ring
Safety Tassel
P. 6
P. 7
<Cord Type>
<Drum Type>
Bracket
Head Rail
Latch onto the
temporary
stopper hook
Push in and up
Latch onto the
temporary
stopper hook
Push in and up
Bracket
Head Rail
Temporary stopper hook
Temporary stopper hook
Installing the main unit
With the screen in the stacked position, latch the temporary stopper hook onto the front groove of the Head Rail.
Push the Head Rail in until it clicks into place.
Attaching surface
Attaching surface
Attaching surface
Attaching surface
After installing the main unit, make sure the main unit is secured to the brackets.
Caution
Uninstalling the main unit
With the screen in the stacked position, grasp the main unit and hold the Bracket release
button while pulling forward.
Remove the main unit from the temporary stopper hook.
<Cord Type>
<Drum Type>
About the Safety Tassel
This Safety Tassel is a part for preventing
unexpected accidents such as the Operation
Cord becoming wrapped around the neck or
body of a child.
Attach the Safety Tassel to the Operation Cord
using the included ring and tie the Operation
Cord in a place where children cannot reach.
Cor
d Joint
(Operation Cor
d)
Cor
d Joint
(Operation Cor
d)
Cor
d Joint
(Operation Cor
d)
Bottom Rail
Bottom Rail
Pull up the Screen
When the Bottom Rail is in the
lowest position, pull the Cord Joint
or the Operation Cord downwards
until the screen is in the position you
want and release your hand.
When the Bottom Rail is partially raised, pull the Cord
Joint or Operation Cord downwards slightly, temporarily
release your hand and then again pull the Cord Joint or
Operation Cord until the screen is in the position you
want and release your hand.
Pull down the Screen
When the Cord Joint or Operation Cord is pulled downwards
slightly, the stopper will be released and the screen will lower. If
you want to stop the screen partway, again pull the Cord Joint or
Operation Cord downwards and the stopper will engage, stopping
the screen.
About the Safety Joint
The Safety Joint is a part designed so that the Operation Cord will
come apart in order to prevent danger in case of the Operation Cord
becoming wrapped around a child's neck or body.
If stress is placed on the Safety Joint or if the Operation Cord is
operated by holding close to the Safety Joint, the Safety Joint will
come apart. If it comes apart, do not attempt to use the Operation
Cord. Re-assemble the Safety Joint before use.
Operation Methods
∗
The changing movement for the Bottom Rail is composed of alternating stop and release movement.
<Cord Type>
Before releasing your hand from the Operation Cord, make sure that the screen is
securely stopped (be sure that the changing movement is set to stop). If the changing
movement is not set to stop, the screen may forcefully fall and cause injury or damage.
Caution
Please do not allow children to play with the operation cord. Otherwise it may become
wrapped around the neck or body and cause an unexpected accident.
Safety
Joint
Operation Cor
d
(rear portion)
∗
When raising and lowering the Bottom Rail, do not pull on the rear portion of Operation Cord.
Damage to the product will occur.
