Menu List
9
Sensivity
Fish ID. Sens.
Surface Clarify
Gain
Shallow Mode
Units
Depth Range
Depth Offset
Color Invert
Chart Speed
Contrast
Shallow Alarm
Fish Alarm
CCU Alarm Vtg.
Beeper
Language
Backlight
Load Default
Simulator
System Info
Dev. Mode
CCU Update
Mode Select
Controls the level of details shown on the display
Adjust the threshold of fish size display. Higher setting allows weak returns being
displayed as fish, while a low setting will prevent it being displayed as fish
Reduces surface clutter by decreasing the sensivity of the receiver near the surface
The gain controls the sensitivity of the hardware receiver. A higher gain makes
the sonar more sensitive to echo returns
Used to get better sonar performance in shallow water
Set the units of measure for all depth or temperature related readouts
Determine in which portion the bottom will be displayed on the screen
Adjust the digital depth readout to indicate depth from the waterline
Invert the color of sonar image
Control how fast the sonar information moves across the screen
Let you to get a suitable display when you operate the unit
Sounds when the depth becomes equal to or less than the menu setting.
Sounds when the fishfinder detects what it determines to be a fish
Alarm when the input battery voltage of transmitter is equal to or less than the setting
Set if the sonar unit sound a tone or not when a key is pressed.
Select the display language for menus
Adjust the brightness of backlight
Used to restore original factory setting
Used to let you practicing using the Fishfinder as if you were on the water
Show system information of device
For engineering using
Used to update CCU
Select a mode for sonar display
So
na
r
Displa
y
Alarm
Sy
stem
