TOSINGRAF DPG330M, Руководство пользователя

Страница: 34 / 41

30 RE V. 2.0- 06/20
Then you access the screen where desired operating speed can be selected (Image 6.6), turning clockwise to increase or anticlockwise to
decrease the speed. Confirm the selection by pressing the central knob (2), thus returning to the main screen with the new setting applied.
If you do not want to change the speed, you can wait 3 seconds without confirming or select the arrow located at the bottom right of the
screen to return to the main screen without making changes.
3
3
Image 6.6
Speed can be adjusted on scale from 1 to 9 where 9 indicates the highest speed of 1,6mt per minute.
m
eter and sheet Counter management
The machine is equipped with a meter and sheet counter, to access the dedicated screen select the symbol as indicated (Image 6.7) and
confirm by pressing the knob (2)
°C
°C
120
120
3
∑
Image 6.7
In the specific screen (Image 6.8) it is possible to check how many meters of laminating film was used and how many sheets were pro-
cessed by each single job. Since the length of the sheets may vary according to the job, on the right it is possible to select the length of
the sheet from [210,297,420,450,480,500]. It is possible to reset the count by selecting the relative icon repressented by a trash bin.
--mt --cm
-- sheet
-- sheet/h
[---]
Image 6.8
The report screen (Image 6.8) is automatically displayed at the end of the processing, when the “RED” button is pressed if the machine
is equipped with this functionality. This functionality has been implemented to allow the operator to record the consumption of material
during a specific processing..
Ch a P t ER 6: usE