Toshiba WT110 Скачать руководство пользователя страница 68

Страница: 68 / 92

User’s Manual

Hardware & Options Operation

Using TOSHIBA Network Attached Storage Utility

This utility is only for TOSHIBA Tablet NAS dock.

You are able to access TOSHIBA Tablet NAS Dock easily by using Network

Attached Storage Utility.
To launch Network Attached Storage Utility, tap

Start

→

All Programs

→

TOSHIBA

→

Utilities

→

TOSHIBA Network Attached Storage Utility.

Power indicator

The

Power

indicator normally glows white when

the dock is turned on. However, this indicator will

glow orange while starting the dock.

Undock button

Press this button to Undocking your device. For

details, please refer to

Connecting the AC

adaptor

section.

Power button

Press this button to turn the dock on and off.

Universal Seral Bus

2.0 port

Four Universal Serial Bus ports, which comply to

the USB 2.0 standard, are provided.

DC IN 19V jack

The AC adaptor connects to this jack in order to

power the device and charge its internal

batteries. Please note that you should only use

the model of AC adaptor supplied with the device

at the time of purchase - using the wrong AC

adaptor can cause damage to the device.

LAN jack

This jack lets you connect to a LAN. The adaptor

has built-in support for Ethernet LAN (10

megabits per second, 10BASE-T), Fast Ethernet

LAN (100 megabits per second, 100BASE-TX).

Some models are equipped with a Gigabit

Ethernet LAN (1000 megabits per second,

1000BASE-T).

HDMI out port

HDMI out port can connect with Type A

connector HDMI cable.
HDMI cable can send video and audio signals. In

addition to this, it can send and receive control

signals.

■

You must dock the device to a NAS Dock before you use TOSHIBA

Network Attached Storage Utility.

■

Refer to

Using the TOSHIBA Tablet Dock

section in this chapter for

details.

Содержание WT110





























































































Результаты поиска

Содержание WT110

Отзывы:

Toshiba WT110, Руководство пользователя, Страница: 68 / 92

Результаты поиска

Содержание WT110

Отзывы: