– 6 –
EN
8
(COMFORT SLEEP) display
Indicated during the OFF timer operation that
automatically adjusts the room temperature and the
fan speed. Each time you push the COMFORT
SLEEP button, the display changes in the sequence
of 1h, 3h, 5h, and 9h.
9
(QUIET) display
Indicated during the quiet operation.
10
Swing display
Indicated during the swinging operation where the
horizontal louver automatically moves up and down.
NOTE
When both wired remote controller or central controller
and wireless remote controller are used, display on the
screen of wireless remote controller may differ from the
actual operation in some cases.
Signal receiving unit
The signal receiving unit is attached to the indoor unit.
1
Temporary operation button
2
Signal receiving part
The signal sent from the remote controller is
received.
3
Display lamp
One of displays flashed while a trouble occurs.
When the display lamp flashes, refer to “Before
asking for repair work”
4
lamp (Green)
This lamp goes on during operation.
5
lamp (Green)
This lamp goes on while the timer is reserved.
6
lamp (Orange)
•
In heating operation this lamp in the following
cases;
The operation has started.
The temp. controller has worked.
The unit is under defrost operation.
•
This lamp flashes while a trouble occurs.
CAUTION
Disagreement in operation mode
•
If “pi, pi” sound is heard, the display lamp goes on,
and the
lamp and
lamp flash alternately, the
operation is not performed with the desired mode.
•
Even if you push START/STOP, MODE,
TEMPERATURE buttons when remote controller
operation is disabled by the central control or other
means, “pi” is heard 5 times and the button operation
is not accepted.
1
4
5
3
6
2
6-EN
+00EB01700201.BOOK Page 6 Wednesday, September 28, 2011 10:22 AM
