Toshiba VTW2887, Руководство пользователя

Страница: 33 / 64

31
DUPLICATING A VIDEO TAPE
If you connect the unit to another VCR or VIDEO CAMERA, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
CONNECTION TO CAMCORDER CONNECTION TO ANOTHER VCR
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instructions. A typical
camcorder dubbing hookup is shown below.
1
2
Press REC on the remote control of the unit,
then press PAUSE/STILL.
3
Press PLAY on the playback VCR, then press
PAUSE.
4
Release the Recording Pause and Still Playback to
begin the duplicating process.
5
NOTES:
•
It is recommended that the tape speed be set to the SP mode on the TV/VCR for best results.
•
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials
may infringe the rights of copyright owners and be contrary to copyright laws.
RECORDING unit
PLAYBACK VTR
TO VIDEO IN
TO AUDIO (L) IN
TO AUDIO (R) IN
AUDIO/VIDEO lead (NOT SUPPLIED)
TO AUDIO (R) OUT
TO AUDIO (L) OUT
TO VIDEO
OUT
RECORDING unit
PLAYBACK
CAMCORDER
To AV Jack
AUDIO/VIDEO lead (NOT SUPPLIED)
TO AUDIO (R) IN
TO VIDEO IN
TO AUDIO (L) IN
Load a blank cassette tape with the erase prevention
tab intact into the unit (these instructions show how
to use this unit as the recording, rather than the
playback device).
Load a previously recorded tape into the playback
VCR or VIDEO CAMERA.
Depending on the device that you are recording from,
you can use either the SCART socket at the rear or
the Front AV Input sockets. Press AV once until “AV1”
appears for recording through the SCART socket or
twice until “AV2” appears for recording through the
Front AV Inputs.
5N50301A [E] P25-32 1/7/05, 4:51 PM 31