Toshiba TLP-250 Скачать руководство пользователя страница 66

Страница: 66 / 77

Others

CONTENTS

Before calling service personal

Symptom

The power does not come on.

The power turns off while

using the projector.

No image appears.

No sound is heard.

Desired input source cannot

be selected by the

INPUT

button.

Analog RGB input or Y/P

input colors are not right.

The image is blurred.

Focusing is uneven.

The picture is dim.

The color is faint.

The tint is not good.

Cause

• The power cord is disconnected.

• The lamp cover is not attached correctly.

• The ambient temperature of the projection room is too high.

• The lens cover is on.

• The wrong input is selected.

• The muting mode is on.

• The “Brightness” adjustment is at its darkest.

• The source is not correctly connected to the projector.

• The wrong input is selected.

• The muting mode is on.

• The sound volume is at it’s minimum.

• The source is not correctly connected to the projector.

• Input is not set so that it can be selected with the

INPUT

button. By

default, only the Analog RGB and Video input modes can be selected.

• The COMPUTER connector's input setting is wrong.

• The lens is dirty.

• The picture is out of focus.

• The projection distance is not appropriate.

• The projecting light is not hitting the screen squarely.

• The “Brightness”, “Contrast”, “Sharpness” or “Phase” adjustments

are not correct.

• The “Brightness” or “Contrast” adjustments are not correct.

• The lamp life is ending.

• The “Color”, “Tint”, “R-Level”, “G-Level” or “B-Level” adjustments

are not correct.

• The lamp life is ending.

Correction

Firmly plug in the power cord.

Attach the cover correctly.

Lower the ambient temperature of the projection room,

and turn the power on.

Take off the lens cover.

Select the input source correctly.

Press

MUTE

to restore the picture.

Make the “Brightness” adjustment.

Connect the source correctly to the projector.

Select the input source correctly.

Press

MUTE

to restore the sound.

Adjust the sound volume.

Connect the source correctly to the projector.

Set from the menu screen so that the source can be

selected with the

INPUT

button.

On the menu screen, set for the proper input signal type.

Clean the lens with a blower or lens cleaner, etc.

Focus the picture.

Adjust the distance properly.

Adjust the projecting direction so that the light hits the

screen squarely.

Make the “Picture” adjustments.

Replace the lamp.

Make the “Color” adjustments.

Replace the lamp.

Page

Check the following points before asking for support service. Refer also to “Trouble indications”.

Continued

Содержание TLP-250














































































Результаты поиска

Содержание TLP-250

Отзывы:

Похожие инструкции для TLP-250

Бренды по названию

Популярные бренды

Toshiba TLP-250, Руководство пользователя

Результаты поиска

Содержание TLP-250

Отзывы:

Похожие инструкции для TLP-250

Бренды по названию

Популярные бренды