48
CONTENTS
Adjustments &
Settings
FULL MENU adjustments and settings - Audio
Adjust the sound volume emitted from the speaker.
The sound is emitted from the speaker.
No sound is emitted from the speaker.
Return the adjustments and settings of FULL MENU [Audio] to the factory default values.
The loudness effect is added to the speaker sound.
The loudness effect is not added to the speaker sound.
The sound of the left and right channels is mixed and emitted from the speaker.
Only the sound of the left input channel is emitted from the speaker.
Only the sound of the right channel is emitted from the speaker.
Yes (common)
Yes (common)
Yes (common)
Yes (common)
Yes
Yes
Yes
Yes
-
-
-
-
-
Y/P
B
/P
R
Video
The relationship between input source and item Yes: Adjustable -: Not displayed
S-Video
Camera
Analog RGB
Volume
ADJ.
Speaker output
On
SET
Off
SET
Reset
EXEC.
Loudness
On
SET
Off
SET
Channel select
L+R
SET
L
SET
R
SET
You can set the sound emitted from the speaker from FULL MENU [Audio].
To operate FULL MENU, refer to page
43
.
Notes
• When the camera input is selected, sound is not emitted.
• Each item can be set at every input source except the camera input, but the settings made at one input source are applied to all input sources as shown
in the table. The sound volume can be adjusted for each input source except the camera input.
• The adjustments or settings made are memorized automatically when the power is turned off by pressing the
ON/STANDBY
button. If the power cord is
unplugged or if a power failure occurs while the projector is on, the adjustments or settings are not memorized.
