Introduction
Connecting your TV
Setting up your TV
Using the TV
’s Features
Appendix
41
Appendix
Appendix
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions.
Symptom
Solution
TV will not turn on
•
Make sure the connection of the AC adapter and AC cord, then press
POWER.
•
The remote control batteries may be dead. Replace the batteries.
No picture, no sound
•
Check the antenna/cable connections.
No sound, picture OK
•
The sound may be muted. Press VOLUME.
•
The station may have broadcast difficulties. Try another
channel.
•
The MTS feature may be in SAP mode. Select STR or MONO in the
MTS menu.
Poor sound, picture OK
•
The station may have broadcast difficulties. Try another channel.
•
The MTS feature may be in SAP mode. Select STR or MONO in the
MTS menu.
Poor picture, sound OK
•
Check the antenna connections.
•
The station may have broadcast difficulties. Try another channel.
•
Adjust the PICTURE menu.
Poor reception of broadcast channels
•
The station may have broadcast difficulties. Try another channel.
•
Check the antenna connections.
Cannot receive above channel 13
•
Make sure TV/CABLE is set to CABLE mode.
Unable to select a certain channel
•
The channel may be blocked by the V-Chip feature or CH LOCK
feature, or erased with the add/erase feature.
Cannot access signal input sources (Video1,
•
Check the VIDEO LOCK feature.
Video2, ColorStream HD, HDMI and PC)
and/or Channels 3 and 4
Multiple images
•
The station may have broadcast difficulties. Try another channel.
•
Use a highly directional outdoor antenna.
Poor color or no color
•
The station may have broadcast difficulties. Try another channel.
•
Adjust the TINT and/or COLOR in the PICTURE menu.
Black box on screen
•
Select OFF in the Closed Caption menu to turn off the Closed Caption
Text mode.
No stereo or SAP sound from a
•
Make sure the MTS feature is set properly (AUDIO menu).
known MTS broadcast
The V-Chip password does not work
•
Change or reset your password.
(U.S. V-Chip system only)
The remote control does not operate
•
Make sure the TV • CBL/SAT • VCR • DVD mode is set properly.
•
Remove all obstructions between the remote control and the TV.
•
The remote control batteries may be dead. Replace the batteries.
The top panel buttons do not operate
• Check the PANEL LOCK feature.
As with all products that contain a digital display, in rare instances, when viewing certain content (e.g..television broad-
casts, video games, DVD), you may notice that the sound and picture are slightly out of sync. This phenomenon can be
caused by various factors including, without limitation, video processing within the TV, video processing in an attached
gaming system, and video processing/different compression rates used by broadcasters in their programming. You may
want to try one or more of the following suggestions, which may help to reduce the effect of this phenomenon: Control-If
the TV is connected to an A/V receiver that has a programmable audio delay feature, use this feature to help synchro-
nize the sound to the picture.-If connected to a video game system and your TV has the Game Mode feature (see
owner’s manual for more information), enable this feature.-If you notice this phenomenon only on certain TV channels,
please contact your local broadcast, cable,or satellite provider to inform them of this issue.
J3U70101C(E)P38-41
15/06/2005, 4:13 PM
41
