Introduction
Connecting your TV
Setting up your TV
Using the TV
’s Features
Appendix
39
INPUT DISPLAY
INPUT DISPLAY
Using the TV
’s Features
Auto power off
The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes
its broadcast for the day and stops broadcasting on that channel. This feature does not work in Video input/PC mode.
Understanding the Power Return feature
If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV on
automatically.
If the power is going to be off for a long time or you are going to be away from home for a long time, unplug the power cord from
the wall outlet to prevent the TV from turning on in your absence.
Adjusting the back lighting feature
If your TV is in a bright room, the screen image may be difficult to see.
You can use the BACK LIGHTING feature to adjust the screen bright-
ness for improved picture clarity.
To adjust the back lighting:
1. Press TV to select the TV mode.
2. Press MENU, then press or until the SETUP menu appears.
3. Press or to highlight BACK LIGHTING.
4. Press a or to adjust the screen brightness.
Displaying on-screen information
Press DISPLAY to display the following on-screen information:
• Clock
• Channel number or Video input mode selected
• Channel label (if preset)
•
Stereo or SAP (second audio program) audio status
•
Content rating
•
On timer, Sleep timer (if preset)
•
Picture size
S T E R E O
S A P
T V - P G L V
O N T I M E R 1 2 : 0 0 A M
S L E E P T I M E R 2 h 0 0 m
A N T
F U L L
A B C D
C L O C K 1 2 : 0 0 A M C A B L E
0 0 2
O F F
F I L M
O N
1 6
S E T U P
C L O S E D C A P T I O N
P I C T U R E S I Z E
C I N E M A M O D E
A S P E C T
B A C K L I G H T I N G
: S E L E C T
: A D J U S T
Note:
The cold cathode fluorescent lamp used for
the back light on this TV has a limited life.
When areas on the screen darken, flicker, or
no longer light up, the lamp may be at the end
of its life. Contact your nearest Toshiba
Authorized Service Station.
Display
Menu
O F F
O F F
O F F
H D M I
/ D V I
A U D I O
W O W S R S 3 D
F O C U S
T r u B a s s
H D M I
R E S E T
: S E L E C T
: A D J U S T
Menu
Selecting the HDMI audio input source
See page 15 for details on connecting an HDMI or a DVI device to the TV’s HDMI input.
If you connect a DVI device, to hear audio you must also connect the analog
audio cables to the HDMI audio IN jacks (see page 15). Set the HDMI audio input
setting to “DVI” with this connection.
If you connect an HDMI device and play media with digital audio output, to hear
digital audio set the HDMI audio input setting to “HDMI” with this connection.
If you connect an HDMI device but play media with analog audio output (for
example, certain CDVs do not output digital audio), to hear audio you must also
connect the analog audio cables to the HDMI audio IN jacks (see page 15).
Set the HDMI audio input setting to “DVI” with this connection.
To select the HDMI audio input source:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the AUDIO menu.
3. Press or to highlight HDMI.
4. Press or to select HDMI or DVI.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
TV
TV
J3U70101C(E)P38-41
15/06/2005, 4:13 PM
39
