Toshiba Tecra A3 Series, Руководство по ресурсам

Страница: 42 / 64

42
Moving the computer
5.375 x 8.375 ver 3.1
If the disc is spinning when you open the disc tray, wait for the disc
to stop before removing it.
4 Close the disc tray by pressing gently on the center of the
tray until it clicks, indicating that it is locked.
Removing a disc with the computer off
1 Insert a slender object, such as a straightened paper clip,
into the manual eject hole.
Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.
2 Pull the tray fully open, remove the disc and place it in its
protective cover.
3 Close the disc tray by pressing gently on the center of the
tray until it clicks, indicating that it is locked.
Moving the computer
Before moving your computer, even across the room, make
sure all disk activity has ended (the drive indicator light stops
glowing) and all external peripheral cables are disconnected.
Never pick up the computer by its display panel or by the back
(where the ports are located).
Mobile computing
Running the computer on battery power
The computer contains a removable Lithium-Ion (Li-Ion)
high-capacity battery that provides power when you are away
from an AC outlet. You can recharge it many times.
To ensure that the battery maintains its maximum capacity,
operate the computer on battery power at least once a month
until the battery is fully discharged. Refer to “Maximizing
battery life” on page 47 in this document for procedures. If
the computer is continuously operated on AC power, either
through an AC adapter or a docking station (if applicable to
your system), for an extended period (more than a month) the
battery may fail to retain a charge. This may shorten the life