Toshiba Tecra A3-S711, Руководство по обслуживанию

Страница: 76 / 208

3.1 The Diagnostic Test 3. Tests and Diagnostics
Tecra A3/S2 Series Maintenance Manual 3-1
3.1 The Diagnostic Test
This chapter explains how to use the Test & Diagnostic program to test the functions of the computer’s
hardware modules. The Test & Diagnostic Program is stored on the T&D diskettes. The program
consists of a series of tests that run automatically when the Diagnostics Program items are selected and
executed.
NOTES: To start the diagnostics, follow these steps
1. Check all cables for loose connections.
2. Exit this program when you are at Main Menu.
The TEST & DIAGNOSTIC PROGRAM contains the following functional tests:
?
CONFIG CHECK TEST
?
DMI CHECK TEST
?
PIO LOOPBACK TEST
?
IEEE1394 TEST
?
SPEAKER AUDIO TEST
?
FAN ON/OFF TEST
?
MAIN BATTERY CHARGE TEST
?
FDD TEST
?
CD-ROM TEST
?
KEYBOARD TEST
?
MOUSE(PAD) TEST
?
LCD PIXELS MODE TEST
?
LID SWITCH TEST
?
HDD R/W TEST
?
LAN TEST
?
RTC TEST
You will need the following equipment to perform some of the Diagnostic test programs.
?
The diagnostics diskette (2 pcs)
?
A printer loopback connector (PIO Loopback Test)
?
A formatted working diskette for the floppy disk drive test (Floppy Disk Drive Test)
?
A data CD disc (CD-ROM Test)
?
A LAN loopback connector (LAN Test)
?
IEEE1394 Link Cable
The following sections explain how to execute the Test & Diagnostic Program and detail the tests within
the program.