Toshiba TEC B-850 Series, Спецификация ключевых операций

Страница: 18 / 90

- 15 -
T O N E A D J . < T > + 3
T O N E A D J . < D > + 5
R B N A D J < F W > - 1 0
R B N A D J < B K > - 5
T H R E S H O L D < R > 1 . 0 V
T H R E S H O L D < T > 0 . 7 V
< 3 > A D J U S T S E T
< 2 > P A R A M E T E R S E T
< 1 > R E S E T
O N L I N E
[PAUSE]
(20) Print density fine adjustment (Direct
thermal print mode):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(21) Press the [PAUSE] key.
[RESTART]
(32) The parameter setting menu is
displayed.
[PAUSE]
(33) Press the [RESTART] key.
[PAUSE] (35) Press the [PAUSE] key.
(34) The reset menu is displayed.
(36) The printer is in the usual initial state.
[RESTART]
(18) Print density fine adjustment (Thermal
transfer print mode):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(30) The fine adjustment value setting menu
is displayed.
(31) Press the [RESTART] key.
(19) Press the [PAUSE] key.
[PAUSE]
[PAUSE]
(22) Ribbon motor drive voltage fine
adjustment (Rewind):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(24) Ribbon motor drive voltage fine
adjustment (Back tension):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(26) Lower reflective sensor manual
threshold fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(25) Press the [PAUSE] key.
(23) Press the [PAUSE] key.
[PAUSE]
(27) Press the [PAUSE] key.
[PAUSE]
(28) Transmissive sensor manual threshold
fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(29) Press the [PAUSE] key.