background image

6

7

Bef

ore Using

IMPORTANT SAFETY INSTRUCTIONS (Continued)

11.  Lightning storms

For added protection for this 

product during a storm, or when it 

is left unattended and unused for 

long periods of time, unplug it from 

the wall outlet.  This will prevent 

damage to the product due to 

lightning and power-line surges.

Never operate this unit on AC 

power during a thunderstorm. If 

you see lightning or hear thunder, 

never touch the unit, cables and/or 

peripherals. An electric surge 

caused by the storm, may result in 

an electrical shock or damage to 

the unit.

12.  Object and Liquid Entry

Never push objects of any kind into 

this product through openings as 

they may touch dangerous voltage 

points or short-out parts that could 

result in a fire or electric shock.  

Never spill liquid of any kind on the 

product.

13.  Do not place or keep the 

projector within the reach 

of the children.

It may fall or tip over, possibly 

causing serious injury.

14.  Do not place the product 

vertically

Do not use the product in the 

upright position or any other 

vertical positions to project the 

pictures. It may fall which could 

result in serious injury and/or 

damage to the product.

15.  Stack Inhibited

Do not stack other equipment on 

this product and do not place this 

product on other equipment. The 

top and bottom surface of this 

product increase in temperature 

during normal use and may 

damage the other unit.

16.  Moving the projector

When carrying the projector, be 

sure to use the carrying handle to 

avoid any damage to the lens or 

main unit.

17.  Attachments

Do not use attachments not 

recommended by product 

manufacturer.

Use of an incompatible 

attachments could cause hazards 

or damage to the product.

18.  Accessories

Do not place this product on 

an unstable cart, stand, tripod, 

bracket, or table.  The product may 

fall, causing serious injury to a 

child or adult, and serious damage 

to the product.  A product and cart 

combination should be moved with 

care.  Quick stops, excessive force, 

and uneven surfaces may cause 

the product and cart combination 

to overturn.

S15A

19.  Damage Requiring Service

Unplug this product from the wall 

outlet and take the product to 

qualified service personnel if you 

encounter any of the following 

conditions:

a) The power supply cord or plug is 

damaged.

b) Liquid has been spilled, or objects 

have fallen into the product.

c) The product has been exposed to 

rain or water.

d) The product does not operate 

normally when following the 

operating instructions.  Adjust only 

those controls that are covered by 

the operating instructions since 

an improper adjustment of other 

controls may result in damage and 

will often require extensive work by 

a qualified technician to restore the 

product to its normal operation.

e) The product has been dropped or 

damaged in any way (If the cabinet 

should break, please handle with 

care to avoid injury) .

f)  The product exhibits a distinct 

change in performance, which 

indicates a need for service.

Содержание TDP-T360






























Отзывы: