Toshiba TDP-P7 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 69

background image

E-I

SAFETY PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING:

Handling the cord on this product or cords associated with accessories sold with this product, will
expose you to lead, a chemical known to the State of California to cause birth defects or other
reproductive harm.

Wash hands after handling

.

WARNING:

This [product] contains mercury. Disposal of mercury may be regulated due to environmental
considerations. For disposal or recycling information, please contact your local authorities or the
Electronic Industries Alliance: www.eiae.org.

USA only

USA only

MODEL NAME: TDP-P7

FCC Radio Frequency Interference Statement

Note:

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiates radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.

WARNING:

Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties
authorized by Toshiba, could void the user’s authority to operate the equipment.

Notice:

This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe
A est conforme à la norme NMB-003 du Canada.

WARNING:

This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.

USA only

USA only

CANADA only

«
1
2
3
4
...
»

Содержание TDP-P7






































































Отзывы:

Нет отзывов

Похожие инструкции для TDP-P7

Бренд: Dukane Страницы: 98

Бренд: Vankyo Страницы: 39

Бренд: paco Страницы: 15

Christie DS+300

Бренд: Christie Страницы: 2

Бренд: Optoma Страницы: 75

Бренд: PLUS Vision Страницы: 2

CP-X2010 series

Бренд: Hitachi Страницы: 3

EB-Z8000 series

Бренд: Epson Страницы: 8

Бренд: Epson Страницы: 61

Бренд: Epson Страницы: 92

Бренд: Epson Страницы: 2

Бренд: Epson Страницы: 2

Бренд: Epson Страницы: 112

Бренд: Epson Страницы: 107

Бренд: Epson Страницы: 6

Бренд: Epson Страницы: 6

Бренд: Epson Страницы: 123

Бренд: Epson Страницы: 86

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды