manualshive.com logo in svg

Toshiba T2150CD Series, Руководство пользователя, Страница: 72 / 179

Поделиться
Скачать
Toshiba T2150CD Series Скачать руководство пользователя страница 72

Once a battery pack is fully charged, it is recommended that you 
operate the computer only on battery power until the battery pack 
completely discharges. Doing so extends battery life and helps 
assure accurate monitoring of battery capacity.

Procedures

To recharge a battery pack while it is installed in the computer, connect the AC power cord 
to the 

AC IN

 socket and plug the other end into a working outlet. Turn the computer off. 

The 

Battery

 LED glows orange when the battery is being charged.

CAUTION

Use only the T2150CD series computer connected to an AC power 
source or the optional Toshiba Battery charger to charge the 
battery pack. Do not attempt to charge the battery pack with any 
other charger.

Time

The following table shows the time required to fully charge a discharged battery.

Charging time (hours)

Battery

Power on

Power off

Battery pack

Trickle charge

2.5

Backup battery

20

20

RTC battery

48

doesn’t charge

Battery Charging Notice

The battery may not charge right away under the following conditions:

1.

The battery is extremely hot or cold. To assure the battery charges to its full capacity, 
charge the battery at room temperature of 10° to 30°C (50° to 88°F). 

2.

The battery is nearly completely discharged. Leave the AC power cord connected for a 
few minutes and the battery should begin charging.

The 

Battery

 LED may show a rapid decrease in battery operating time when you try to 

charge a battery under the following conditions:

The battery has not been used for a long time.

Содержание T2150CD Series




















































































































































































Отзывы:

Нет отзывов